-MEASURE DEPTH, DISTANCE AND SLOPE
ENTRY-LEVEL 2D MACHINE CONTROL SYSTEM
EASY TO USE
Xsite EASY is an easy-to-use machine control system that saves time and money for the contractor. When the bucket level is known with an accuracy of one centimetre, there is no need for level-checking pauses in excavation work. Whether you are working with laser or without, the Xsite EASY is a great partner for earthworks!
UPGRADEABLE TO 3D SYSTEM
EXCAVATION DEPTH AND DISTANCE
You can measure the depth and horizontal distance by resetting the bucket at the desired starting point.
When measuring the slope, the system indicates the height difference between the bucket and the target surface. The target slope is entered into the system before the work starts.
The laser receiver enables moving the machine at the site without losing the original level. The laser that has been set to a known site level can also act as a reference level.
BUCKET TILT ANGLE
With the help of the tilt bucket sensor, you can set the measurement point to the lowest corner of the bucket, and observe the sideways tilt angle on the display.
When dredging, seeing the bucket position on the display is a remarkable advantage. The sensors are fully waterproof.
The alarm thresholds bring added security when, for instance, working under power lines. The system warns the operator if the bucket or boom is raised beyond a set point.
EASY TO UPGRADE
Different sites place different requirements on the work machine’s measurement system. For some types of tasks, a 2D system is adequate, whereas other sorts of jobs require that the contractor employs a 3D system.
Thanks to compatible sensors, the Xsite EASY can be easily updated to 3D system.
The water tight sensors measure in three directions and are equipped with a heating element,
ensuring accurate measurements even in the most inhospitable conditions. The small size of the sensors makes it possible to fit them in a sheltered location.
1 - 4
QUICK INSTRUCTION VIDEOS
DIGGING FROM ZERO LEVEL
DIGGING WITH A KNOWN STARTING LEVEL
SLOPE DIGGING FROM ZERO LEVEL
SLOPE DIGGING WITH A KNOWN STARTING LEVEL
SLOPE DIGGING WITH LASER RECEIVER
DEPTH MEASUREMENT FROM LASER JOBSITE HEIGHT
MOVING THE EXCAVATOR WITH LASER RECEIVER
BACK TO TOP